AstroGab

Astrophotographers hangout. Invite friends and notice chat bar on bottom.

Does anyone know how to use this camera as a guider with a CGEM

Views: 463

Reply to This

Replies to This Discussion

Hi Philip,
I don't have a CGEM but I do have a Celestron CGE. I use a Meade DSI for all my guiding and an Equinox 80mm as my guider. I use a GPUSB purchased from Shoestring with either PHD or MaximDL to guide.I have tried pulse guiding with the H/C and MaximDL but didn't see any advantage over the other so I usual guide using the GPUSB.

Gregg

Hey Greg, thanks for the info very much appricated. As it turns out I had bought a GPUSB from Shoestring a while back but I was not sure if it would work with the Meade but realized after reading what you wrote the camera is a camera no matter what. I had a look at PHD, it looks like a great little piece of software. I should be giving everthing a try in the next couple of days. Thanks again, Phil

No problem Phil, with an 80mm guide scope and the DSI PRO, I have never had any troubles finding a guide star.
Gregg

I second that.... CGE mount and use the DSI pro on a WO66 with the GPUSB

It will be the first time guiding for me, I am a lttle nervous but I must say Gregg has given me some get up and go and so have you. I am going to give it a try tonight and tomorrow if the skies are well. I will show you how it goes.................I hope

I use the DSI 1 color version to autoguide my EQ-6, using a Celestron 102 SLT, from time to time I had some hard time to get some suitable guide star but was working, I moved later to an ATIK 16ic (mono) because it is cooled, trying to guide in the hot summer nights with the DSI was not funny. I used PHD to autoguide and without that GPUSB adapter

Hi Emil, Thanks for the information. I tried guiding with my DSI Pro (mono) last week but no success. I think PHD was acting a bit wierd so I have re-installed it but have yet to try it again. Interesting not using the GPUSB, are you using a ST-4 cable straight from your laptop? Thanks again, Phil

Err nope, PHD connected to mount and DSI selected, no other accessory used. I dont know why are the people using that gpusb stuff when is not necessary.

RSS

© 2019   Created by Charles Dunlop.   Powered by

Badges  |  Report an Issue  |  Terms of Service